Tag: GF-models

F1 RACING MINIATURES, Formula 1, Gilles Villeneuve, WORKBENCHLeave a comment

Another Gilles Villeneuve helmet!

admin

I’m making a habit of re-doing visors – it’s not that I like doing them but the first one I did for this version of the figure went missing!  This is the ‘GF figure of Gilles again as per his ’82 attire but this time I’ve included the visor for his GPA helmet. – As I didn’t have a decal for the “GPA” lettering at the time of construction, I painted it in, however, since then I bought the Modellers figure which comes with a really good set of decals – including the “GPA” decal for the helmet but there’s … Continue reading Another Gilles Villeneuve helmet!

F1 RACING MINIATURES, Formula 1, Gilles Villeneuve, WORKBENCHLeave a comment

Gilles Villeneuve – Bell helmet – completed

admin

I picked up some really good decals from Modellers for their Villeneuve figures and I nicked a pair of SMEG decals for the helmet – the decals I have on the Bell helmet in these shots are more than likely not the branding he would have sported while wearing this very early driving suit – they would be more appropriate for his red driving suit which will be the subject of another figure I’m converting at the moment. Continue reading Gilles Villeneuve – Bell helmet – completed

F1 RACING MINIATURES, Formula 1, Michael Schumacher, WORKBENCHLeave a comment

The “NO PARKING” incident – Monaco 2006

admin

At last I’ve united “Schumi” with his completed Schuberth helmet and gloves.  I’ve posed him with a piece of armco (which I still have yet to properly paint) to take a few shots.   He’s depicted in the “Rainbow” colored driving suit he wore during the Monaco Grand Prix of 2006.  That was the time when he “parked” at the Rascasse corner during qualifying and thereby robbing Alonso (who was following behind on a “hot” lap) of a quicker time – seen here on YouTube http://www.youtube.com/watch?v=2jcHrHUJdu0&NR=1&feature=fvwp Continue reading The “NO PARKING” incident – Monaco 2006

Formula 1, Michael Schumacher, WORKBENCHLeave a comment

Schumachers Schuberth lid

admin

Continuing on with the GF driver figure, I want to include some extra detail in the helmet/visor.  On the helmet itself, I’ll include a drink tube extending from the helmet and the visor will look a lot better if I include the lifting handle at the front together with the small lift handles on either side and the tear-off visor ends.  I’ll also attach two small inflator tubes to the shoulder pads for the Hans device.  Firstly, the drink tube is made from a length of plastic taken from a department store price tag – (the type which attaches to … Continue reading Schumachers Schuberth lid

Formula 1, Gilles Villeneuve, WORKBENCHLeave a comment

Gilles Villeneuve – another take – WIP

admin

This is another of the great 1/20 scale resin driver figures from GF-models.  This time I’ve depicted him wearing the helmet and white suit worn in the latter stages of his F1 career – some sources show this as the outfit he wore from the ’82 season (his last) and other references I’ve seen show him wearing it prior to that.  Once again, I had a go at using the old Tamiya decals from a couple of the Pit/Driver sets I have from over 20 years ago and (with the exception of the blue lines for the helmet) I was … Continue reading Gilles Villeneuve – another take – WIP

F1 RACING MINIATURES, Formula 1, Gilles Villeneuve, Michael Schumacher, Trackside accessories, WORKBENCHLeave a comment

Keep it on the “black stuff” – with the help of Armco!

admin

A while back, I posted pictures of how I modified the Armco barrier which comes with the Tamiya pit set.  I gave it a coat of primer, so now all I have to do is paint it up (Red&White I think?) with some appropriate weathering and it should make a nice “prop” for photographing the 1/20 driver figures. I placed it on a suitable base to take some test shots and see how it looked with figures of the same scale, and I think it looks the part. Continue reading Keep it on the “black stuff” – with the help of Armco!

F1 RACING MINIATURES, Formula 1, Michael Schumacher, WORKBENCHLeave a comment

Michael Schumacher 1/20 Driver figure – nearly there!

admin

I just finished putting the last of the decals on – a bit of a mixture in terms of the main sponsor (Marlboro) – I started out with the “Barcoded” livery in mind, and as I didn’t have a set of appropriate decals to hand I painted the main barcode panel on the back of the suit.  That was some weeks ago, and in the meantime I’ve been working on various other items and figures, jumping from one thing to the next, and when I restarted this figure the other day I’d forgotten about barcodes and instead went straight ahead … Continue reading Michael Schumacher 1/20 Driver figure – nearly there!