Ayrton Senna driver figure – Imola ’94

I’ve finished all the “Miliputting” now! – his head has now been properly attached, I gave him a pair of thumbs and added more detail to the suit and hat and generally refined the pose – so he looks pretty good now.  I’ve just undercoated him with a couple of primer coats, so while that dries I’ll get to work on adding detail to the flight-case (table) on which his helmet, gloves and (Rolands) flag are resting – I’ll also probably add a water bottle (which I’m carving from clear sprue) to include a balancing vertical.  All the levels and … Continue reading Ayrton Senna driver figure – Imola ’94

Ayrton Senna – Imola 1994

“Senna the Movie” has generated an unprecedented amount of discussion and interest into Ayrton Sennas life and indeed, his untimely and tragic death.  And while the movie has unleashed many new insights into different aspects of his racing career, it has also raised many more questions.  Ever since Senna burst onto the F1 scene back in the early ’80’s, I have always been a fan and I often found myself watching somewhat boring races just to see him perform.  I always felt once he was on track his mere presence held promise of something “different” happening, even when the race … Continue reading Ayrton Senna – Imola 1994

F10 Steering wheel…important bit @300KPH!

Another little piece of the jigsaw – I popped some color and various shades of grey to bring this rather important pice of the jigsaw together – so far it’s looking ok – I may use a little bit of CF to make it a bit more convincing and I also have to place the prancing horse logo in the centre… and on we go…boring, boring I hear you say – yep!! & as I couldn’t decide which pic was the most clear, I posted them all! Continue reading F10 Steering wheel…important bit @300KPH!

A Fascinating Formula 1 reference book

I just purchased another copy of my favourite F1 reference book – “GRAND PRIX Fascination Formula 1” by Ranier Schlegelmilch.  I already have the ’93 edition (which has now become slightly dog-eared from constant use) and this latest one is the ’95 edition with the same content but a slightly different dust-jacket.   It’s a wonderful pictorial history  covering 25 years of F1 from mid 70’s to the mid 90’s and in my view is an absolute must for modelmakers & F1 enthusiasts.  I got mine on Amazon at a bargain price – I was actually browsing the web for another … Continue reading A Fascinating Formula 1 reference book

F10 Seat harness…………..

…….at the third attempt!  I’ve lost so many of the fiddly bits from the belt buckle set as they flew off in all sorts of directions around the room that I’ve ended up cobbling together a very unorthodox looking harness – but for now it’s done – well nearly – I have to trim some of the hairyier looking bits and add the Santander logos to the shoulder straps.   The other problem I had was getting the straps to sit down correctly rather than standing proud of the seat.  Seat harnesses are quite a weighty item (given that they have … Continue reading F10 Seat harness…………..

“Le Petit Professeur”!

This is another of my 1/43rd scale driver figures.  Cast in metal by Denizen it has a remarkable likeness to Alain Prost! aka: “Le petit Professeur”. Other than using one “Marlboro” decal for the back of the figure, I finished the rest in Valejo acrylics (using a little bit of artistic licence here and there!) followed by two protective coats of matte varnish.  The gloves (which are cast flat) are also a Denizen item.  I was undecided about how to place them with the figure so I used two pairs (one flat and the other I bent with a pair … Continue reading “Le Petit Professeur”!

Ferrari F10 seat harness

Using a beautiful little Folding tool (the Flip-R5) from RB Productions, I’ve started folding the parts from the SCALE Motorsport photoetch 1/24 Harness  kit # 8124.  I have to admit my approach to folding photoetch in the past has been very unscientific – a razor-blade and the edge of a steel ruler was always guaranteed to produce a slightly wonky result!   The photoetch kits from SCALE Motorsport are top class and using the Flip-R5 for the first time was an absolute revelation – never knew it could be so easy – a wonderful little tool which made short work … Continue reading Ferrari F10 seat harness

Ferrari F10 Revell – at last more progress……………..!

I  eventually re-united myself with the F10 project I’ve had on the go now for several months.  Spent a couple of hours applying the “CF” decals in all the relevant places and I have to say they went on an absolute dream -  sublime to work with and no trimming required – printing is spot-on – just slide them off the paper and apply a little softening solution, then stand back and admire!   Now that I have a bit of momentum going again on this project I’ll try and finish the “All Black” version in the next few days – … Continue reading Ferrari F10 Revell – at last more progress……………..!